Tilting type ring, designed according to UNE-EN 1270 regulations. Its inner diameter is 450 mm in accordance with FIBA (International Basketball Federation) regulations.
Made of steel, it has a locking system that releases the ring when a certain vertical load is applied to it. This system is adjustable, so that it can be adjusted so that the ring releases under loads between 82 and 105 kg, as specified by FIBA regulations. Once the ring is released, a spring system that is also adjustable is responsible for cushioning the descent and returning the ring to its initial position.
The front casing is made of polyurethane, in order to avoid possible damage to the players.
The ring is fixed by means of four threaded bolts housed in its rear part. To fasten the net to the ring, it has an internal circular channel through which a grommet-type guide passes.
The product is painted with polyester powder paint, which is applied after degreasing treatment, which takes place in pressurized phosphatizing bath, and polymerized in oven at 200 ºC.
NOTE: No net is supplied with the ring.