GLASS-BACKBOARD, METAL FRAME AND FRAME PROTECTOR SET

Unit composed of a glass backboard, a metal frame as a metal chassis and a padded protector at the bottom. All this completely assembled to be used as a Backboard in the high-level MONDO basketball baskets. This set has been designed and manufactured in accordance with the UNE-EN 1270 standard and the requirements of FIBA (International Basketball Federation) Level 1 competitions. The Backboard (dimensions 1,800 x 1,050 mm) is made of 12 mm thick tempered glass, using two 6 mm glass sheets joined by an intermediate PVB (polyvinyl butyral) film that allows fragments to adhere in the event of damage. accidental breakage during play. The signage with white bands established by the regulation is made with adhesive vinyl. The perimeter metal frame in which the glass Backboard is mounted is made of a rectangular steel section measuring (50 x 30 mm). There is no direct contact between the steel of the frame and the glass, since a 30 Shore hardness neoprene band is interposed between them. In the Rim fixing area, the metal frame has a design that also avoids any contact between the glass and the rim. It is supplied with a polyester powder paint finish, applied after a pressure degreasing phase and polymerized in an oven at 200ºC. The purpose of the protector is to avoid any damage to the players, in the event of an eventual crash against the lower and lateral part of the Backboard. It is made of semi-rigid polyurethane with a density of 400 Kg/m3 and is available in both blue (PK961) and black (PK962). NOTE: the codes PK865 and PK866 refer to a unit of the set consisting of a glass backboard + metal frame + frame protector.