Kit for Shot Put Throw in indoor enclosures, consisting of a portable throwing circle, several mat modules, and a stop barrier.
The stop barrier (AL905) consists of the standing support structure surrounding the sides and bottom of the landing sector and a safety net. The standing support structure (AL900000010) is 14 meters long and 9 meters wide, and has poles that place the safety net at a height of 4 meters. This structure is made up of several vertical poles joined together by metal frames. The frames have wooden boards that stop the weights when they are thrown. The base of each pole has two points of attachment to the ground by means of an expandable metal anchor.
The safety net supplied (PG160K) is made of 4mm high tenacity polypropylene rope, and is knotless woven forming a 40x40 mm mesh.
A total of 84 memory foam mats (AL901) are placed inside the landing sector. The body of the mat consists of an upper layer that offers a slow recovery to allow the measurement of the throw, plus an underlayer soft enough to cushion the impact.
Each foam mat module is covered with a 1.5 mm thick PVC layer, which makes it highly resistant to wear and tear.
Finally, the kit includes a portable throwing platform (AL051) consisting of a metal framework with a 19 mm wooden board as a floor, plus a 2,135 mm inner diameter throwing circle and a counterweight box. The platform can be disassembled into two halves for easy transport and storage.