Designed and manufactured in accordance with the requirements of the European standard EN-1270.
The methacrylate basketball backboard is made up of the backboard and its metal perimeter rear frame.
The board is made of cast methacrylate (density 1.19Kg/m3) with a high impact resistance, greater than >10Kgm/cm2 in the Charpy pendulum. It has good light transmission according to UNE 53340, as well as good transparency.
The perimeter frame of the board, made of a steel profile with a 50 x 30mm rectangular section, arranged on the back of the methacrylate, allows us to easily fix the set to any type of basket unit manufactured by our firm, as well as fixing the ring.
The union of the methacrylate board with the metal frame is carried out through screws that are embedded in the methacrylate itself, with which they are not visible from the front.
The steel screws are subjected to a zinc plating treatment.
The signage with white bands established by the regulation is made with adhesive vinyl.
The rear frame is painted with polyester powder paint, applying it after a degreasing treatment using a pressure phosphate bath and polymerization in an oven at 200ºC.